Dr. Rajeev Kumar

Dr. Rajeev Kumar
Phone : 01905-237920
EMail : rajeev[at]iitmandi[dot]ac[dot]in
Address : School of Engineering
IIT Mandi, PWD Rest House 2nd floor,
near Bus Stand, Mandi - 175001
India

Research interests

  • Machine Design
  • Solid Mechanics
  • Vibration
  • Smart material/Structure
  • Finite Element Method
  • Modeling & Control
  • Optimization (Genetic Algorithm)

Education

  • PhD in Mechanical Engineering from Indian Institute of Technology Roorkee, 2008, Thesis title: Shape & Vibration Control of Smart Structure
  • M.Tech. in Mechanical Engineering (Specilization:Computer Aided Design) from Harcourt Butler Technological Institute (HBTI) Kanpur, 2002
  • B.Tech. in Mechanical Engineering from Institute of Engineering & Technology, CSJM University, Kanpur, 2000

Professional Experience

  • Engineer in Aircraft Engine Division, General Electric (GE), John F. Welch Technology Centre, Bangalore (February 2008-August 2010)
  • Lecturer in Mechanical Engineering Department, Sardar Vallabhbhai National Institute Technology (SVNIT), Surat (November 2007-January 2008)

Awards

  • National Doctoral Fellowship (NDF) awarded by the All India Council for Technical Education (AICTE), during Ph.D (2003 - 2007)
  • Green Belt Certificate awarded by General Electric (GE) John F. Welch Technology Centre, Bangalore

Research Publications

  • D. Singh, S. Sharma, R. Kumar, V. S. Chauhan," Fuzzy logic based active vibration control using novel photostrictive composites." Composite Structures, 2023 DOI:10.1016/j. Composite Structure, 2023, 116919.

  • Singh Diwakar, Raj Kiran, Komal Chawla, Rajeev Kumar, Vishal S. Chauhan, and Rahul Vaish. "Determination of multi-physics effective properties, and actuation response of triply periodic minimal surface based novel photostrictive composites: A finite element analysis." International Journal of Engineering Science, 2022, 178, 103726.

  • Singh Diwakar, Saurav Sharma, Rajeev Kumar, Vishal S. Chauhan, and Rahul Vaish. "Photostrictive effect in 1-3 composites of photovoltaic and piezoelectric phases: A numerical study." Journal of Intelligent Material Systems and Structures, 2022,: 1045389X211053050.

  • Adhikari, J., Kumar, R., & Jain, S. C. Using modified Halpin Tsai based approach for electromechanical analysis of functionally graded graphene reinforced piezoelectric tile. International Journal of Mechanics and Materials in Design, 2022, 1-20.

  • Adhikari, J., Kumar, R., Narain, V., & Jain, S. C. Electromechanical study of graphene reinforced lead-free functionally graded tile for vibration energy harvesting. 2022, Journal of Intelligent Material Systems and Structures,1-20 https://doi.org/10.1177/1045389X221121949

  • Adhikari, J., Kumar, R., & Jain, S. C. Angular poling effect on cymbal piezoelectric structure using rhombohedral and tetragonal PMN-0.33 PT for energy harvesting applications. Applied Physics A: Materials Science & Processing, 2022, 128(5), 384.

  • Prakash Poudel, Saurav Sharma, Mohamed Nainar Mohamed Ansari, Pushpendra Kumar, Sobhy M. Ibrahim, Rahul Vaish, Rajeev Kumar and Paramanandam Thomas. The Bacterial Disinfection of Water Using a Galloping Piezoelectric Wind Energy Harvester. Energies 2022, 15, 6133. https://doi.org/10.3390/ en15176133

  • S. Kumar, T. P. Singh, R. Kumar and S. C. Jain, “Parametric and Experimental Analysis of Sliding Mode Triboelectric Energy Harvester”, Mechanics Based Design of Structures and Machines (Accepted).

  • Singh Diwakar, Saurav Sharma, Rajeev Kumar, Vishal S. Chauhan, and Rahul Vaish. "Lead lanthanum zirconate titanate (PLZT)-based fiber composites for enhanced photostrictive actuation: a numerical study." The European Physical Journal Plus, 2021, 136 (11), 1-21.

  • S. Kumar, R. Kumar and S. C. Jain, “Detailed Investigation of Sinusoidal Vibration on Triboelectric Energy Harvester”, 2021, Journal of Green Energy Vol 16

  • S. Kumar, D. Singh, R. Kumar and S. C. Jain., No-Wear Vibration Energy Harvester Based on a Triboelectric Mechanism (2021), Journal of Electronic Materials, Vol 50, pp.7057-7070.

  • Kamalpreet Singh, Saurav Sharma, Rajeev Kumar, and Mohammad Talha. A 3-dimensional approach for evaluating the influence of poling orientation on piezoelectric characteristics. Journal of Electronic Materials. accepted

  • Jitendra Adhikari, Anuruddh Kumar, Rajeev Kumar & Satish Chandra Jain Performance enhancement of functionally graded piezoelectric tile by tailoring poling orientation. Mechanics Based Design of Structures and Machines (2021).

  • Singh Diwakar, Sharma, S., Kumar, R., Chauhan S. Vishal., & Vaish R. Novel Photostrictive 0-3 Composites: A Finite Element Analysis. Mechanics of Advanced Materials and Structures.

  • Singh Diwakar, Sharma, S., Kumar, R., Chauhan S. Vishal., & Vaish, R. A finite element computational framework for enhanced photostrictive performance in 0-3 composites. International Journal of Mechanics and Materials in Design (2021). Manuscript ID : MAMD-D-21-00023R2. (Accepted)

  • Saurav Sharma, Diwakar Singh, Rahul Vaish, Rajeev Kumar and Vishal Singh Chauhan Performance indexes for flexoelectricity in transverse and longitudinal modes. J. Appl. Phys. 129, 145105 (2021).

  • R. M. Pindoriya, R. K. Thakur, B. S. Rajpurohit, and R. Kumar, “Numerical and Experimental Analysis of Torsional Vibration and Acoustic Noise of PMSM Coupled with DC Generator”, IEEE Transactions on Industrial Electronics, 2021

  • Kamalpreet Singh, Saurav Sharma, Rajeev Kumar, and Mohammad Talha. Vibration control of cantilever beam using poling tuned piezoelectric actuator. Mechanics Based Design of Structures and Machines. (Accepted) (2021).

  • Sharma, S., Kumar, R., Talha, M., & Vaish, R. Universal Converse Flexoelectricity in Dielectric Materials via Varying Electric Field Direction. International Journal of Smart and Nano Materials (2021).

  • Tarun Kumar, Rajeev Kumar, S C Jain, Numerical Investigation of Semi-Active Torsional Vibration Control of Heavy Turbo-Generator Rotor Using Magnetorheological Fluid Dampers, Journal of Vibration Engineering & Technologies, DOI: 10.1007/s42417-020-00276-5, (2021)

  • Sharma, S., Kumar, R., Talha, M., & Vaish, R. (2020). “Strategies to instigate superior electromechanical response in dielectric materials via converse flexoelectricity.” Extreme  Mechanics Letters. Volume 42, January 2021, 101138.

  • Sharma, S., Kumar, R., Talha, M., & Vaish, R. Flexoelectric Poling of Functionally Graded Ferroelectric Materials. Advanced Theory and Simulations, Volume 4(1), 2000158-2000161, (2020).

  • Raj Kiran, Anuruddh Kumar, Saurav Sharma, Rajeev Kumar, Rahul Vaish. Deciphering the importance of graded poling in piezoelectric materials: A numerical study. Engineering Reports, Volume 2 (11), (2020).

  • Sharma, S., Kumar, R., Talha, M., & Vaish, R. Design of spatially varying electrical poling for enhanced piezoelectricity in Pb(Mg1/3 Nb2/3)O3–0.35PbTiO3). International Journal of Mechanics and Materials in Design, Vol 17, 99-118, 2020.

  • S. Kumar, R. Kumar, W. Seemann and S. C. Jain, “Modeling and Analysis of Vertical Contact Mode Triboelectric Energy Harvester”, Journal of . Integrated Ferroelectrics. Volume 212, 2020, 68–80

  • Saurav Sharma, Anuruddh Kumar, Rajeev Kumar, Mohammad Talha, Rahul Vaish Geometry Independent Direct and Converse Flexoelectric Effects in Functionally Graded Dielectrics: An Isogeometric Analysis. Mechanics of Materials. Volume 148, September 2020, 103456.

  • Sharma, S., Kumar, A., Kumar, R., Talha, M., & Vaish, R. Active vibration control of smart structure using poling tuned piezoelectric material. Journal of Intelligent Material Systems and Structures, Volume 31 (10) 1284-1297, 2020.

  • Tarun Kumar, Rajeev Kumar, S.C. Jain Finite element analysis of actively controlled heavy rotor using PVDF piezoelectric layer as sensor and actuator. Engineering Reports. ENG-2020-01-0247 

  • Rajesh M. Pindoriya, Bharat Singh Rajpurohit, Rajeev Kumar, A Novel Application of Harmonics Spread Spectrum Technique for Acoustic Noise and Vibration Reduction of PMSM Drive. IEE Access, Volume 8, 103273- 103284, 2020..

  • Kumar A, Ghosh R, Kumar, R.. Effects of interfacial crack and implant material on mixedmode stress intensity factor and prediction of interface failure of cemented acetabular cup, Journal of Biomedical Materials Research.Part B Applied Biomaterials Volume 108, 1844-1856, (2020).

  • Kumar A, Sanjay D, Mondal S, Ghosh R, Kumar, R.. Influence of interface crack and ununiform cement thickness on mixed-mode stress intensity factor and prediction of interface failure of cemented acetabular cup. Theoretical and applied fracture mechanics Volume 107, 102524, 2020.

  • Rajesh M. Pindoriya, Anshul K. Mishra, Bharat S. Rajpurohit, and Rajeev Kumar An Experimental Investigation of Acoustic Noise and Vibration of PMSM Induced by Power Electronics Converters. Electric Power Components and Systems, 48(19-20): 2005–2018, 2020

  • Kumar A, Shitole P, Ghosh R. Kumar R, Gupta A. Experimental and numerical comparisons between finite element method, element-free galerkin method, and extended finite element method predicted stress intensity factor and energy release rate of cortical bone considering anisotropic bone modelling, Proceedings of the Institution of Mechanical Engineers, Part H : Journal of Engineering in Medicine, Volume 233, 823–838, 2019

  • Raj Kiran, Anuruddh Kumar, Rajeev Kumar and Rahul Vaish Effect of poling orientation on piezoelectric materials operating in longitudinal mode, Mater. Res. Express 6, 2019, 065711

  • Anuruddh Kumar, Rajeev Kumar, Satish Chandra Jain and Rahul Vaish.Vibration induced refrigeration and energy harvesting using piezoelectric materials: a finite element study. RSC Adv., 2019, 9, 3918

  • Anuruddh Kumar,Aditya Chauhan,Satyanarayan Patel, Nikola Novak,Rajeev Kumar, Rahul Vaish.Vibration induced refrigeration using ferroelectric materials. Scientific Reports volume 9, Article number: 3922 (2019).

  • Amit Kumar,Sumeet Kumar Sharma, Vishal S. Chauhan and Rajeev Kumar. Electromagnetic radiation response from cement paste: a tool to monitor hydration and extent of deformation. Journal of Sustainable Cement-Based Materials. Volume 8, 2019 - Issue 1

  • Himmat S. Kushwaha  Anuruddh Kumar, Rajeev Kumar, Rahul Vaish. A Water Driven Triboelectric Generator for Electrocatalytic Wastewater Treatment. Energy Technology. https://doi.org/10.1002/ente.201700609

  • Sharma, Sumeet; Kiran, Raj; Kumar, Amit; Chauhan, Vishal; Kumar, Rajeev. A theoretical model for the electromagnetic radiation emission from hydrated cylindrical cement paste under impact loading (2018 J. Phys. Commun. 2 035047)" by

  • Anuruddh Kumar,Anshul Sharma, Rahul Vaish, Rajeev Kumar,Satish Chandra Jain. (2018) A numerical study on anomalous behavior of piezoelectric response in functionally graded material. Journal of Materials Science, February 2018, Volume 53, Issue 4, pp 2413–2423.

  • Abhishek Bangunde, Tarun Kumar, Rajeev Kumar and S C Jain. Torsional vibration analysis in turbo-generator shaft due to mal-synchronization fault. Mater. Sci. Eng. 330 012093, 2018.

  • Vishrut Shah, Rajeev Kumar, Mohammad Talha, and Jens Twiefel (2018): Numerical and experimental study of bistable piezoelectric energy harvester. Integrated Ferroelectrics 2018, VoL. 192, 38–56.

  • S K Sharma, R Kiran, A Kumar, V S Chauhan, R Kumar, A theoretical model for the electromagnetic radiation emission from hydrated cylindrical cement paste under impact, Journal of Physics Communication, 2 (3) (2018) 035047

  • C.K. Susheel, Rajeev Kumar, Vishal S. Chauhan . Geometrical nonlinear characteristics of functionally graded structure using functionally graded piezoelectric materials. Journal of Sandwich Structures and Materials. Accepted

  • Kumar, Anuruddh ; Raj kiran; Kumar, Rajeev; Chauhan S. Vishal, Vaish, Rahul.A comparative numerical study on piezoelectric energy harvester for self-powered pacemaker application. Global Challenges . 2018, Vol. 2, PP 1700084

  • Sharma Anshul ,Kumar, Anuruddh ; Kumar, Rajeev; Vaish, Rahul , Finite element study on acoustic energy harvesting using lead-free piezoelectric ceramics. Journal of Electronic Materials. February 2018, Vol. 47, No. 2, pp 1447–1458.

  • Kumar, Anuruddh ; Sharma Anshul; Kumar, Rajeev; Jain Satish Vaish, Rahul A Numerical Study on Anomalous Behavior of Piezoelectric Response in Functionally Graded Materials. J Mater Sci (2018) 53:2413–2423

  • Anshul Sharma, Bharat Singh Rajpurohit, Rajeev Kumar. Induction Machine Drive Design for Enhanced Torque Profile. IEEE Transactions on industry applications, Vol. 54, No. 2, MARCH/APRIL 201

  • Anuruddh Kumar, Aditya Chauhan Rahul Vaish, Rajeev Kumar, Satish Chandra Jain . Structural Optimization for Wideband Flexoelectric Energy Harvester Using Bulk Paraelectric Ba0.6Sr0.4TiO3.,. Journal of Electronic Materials. DOI : 10.1007/s11664-017-5772-6

  • Kiran, Raj; Kumar, Anuruddh ; Chauhan, Vishal; Kumar, Rajeev; Vaish, Rahul . Engineered Carbon Nanotubes Reinforced Polymer Composites for Enhanced Thermoelectric Performance" by. Article reference: MRX-104820.R1.

  • R kumar, V S Chauhan, A Kumar, K Prasad, Detection of deformation induced electromagnetic radiation from cement - barium titanate composite under impact, Ceramics International, 44 (2018) 11711-11717

  • Kumar, Anuruddh, Kumar, Rajeev Vishal; Chauhan, Vaish, Rahul . A  Finite Element Study on Performance of Piezoelectric Bimorph Cantilever using Porous/Ceramics 0-3 Polymer Composites. Journal of Electronic Materials. Vol. 47, No.1. (2018)

  • Kumar, Anuruddh, Kumar, Rajeev Vishal; Chauhan, Vaish, Rahul, Pyro-paraelectric effect in ferroelectric materials: A device perspective for transcending Curie limitation. Journal: Materials Today Communications. Ref: MTCOMM_2017_68_R1.

  • A kumar, V S Chauhan, R kumar, K Prasad. Electromagnetic radiation detection in 0-3 cement-PZT composite under impact loading, Integrated Ferroelectrics, Volume 192, 2018 - Issue 1

  • A Kumar, V S Chauhan, S K Sharma, R kumar, Deformation induced electromagnetic response of soft and hard PZT under impact loading, Ferroelectrics, 510 (2017) 170 – 183

  • C.K. Susheel, Rajeev Kumar, Vishal S. Chauhan. Nonlinear vibration analysis of piezolaminated functionally graded cylindrical shell. Int. J. of Nonlinear Dynamics and Control. Int. J. Nonlinear Dynamics and Control, Vol. 1, No. 1, 2017.

  • C.K. Susheel, Rajeev Kumar, Vishal S. Chauhan.(2016): An investigation into shape and vibration control of space antenna reflectors".  Smart Materials and Structures. 25, 125018-125035.

  • Anshul Sharma, C.K. Susheel Anuruddh Kumar, Rajeev Kumar.(2016):  Smart damping of functionally graded nanotube reinforced composite rectangular plates. Composite Structures. 155, 29-44.

  • Anshul Sharma, Rajeev Kumar, Rahul Vaish and Vishal S. Chauhan. (2016): Experimental and numerical investigation of active vibration control over wide range of operating temperature. Journal of Intelligent Material Systems and Structures. 27(13), 1846-1860.

  • Vishrut Shah, Rajeev Kumar, Mohammad Talha, and Rahul Vaish.(2016): Piezoelectric materials for bistable energy harvester: A comparative study. Integrated Ferroelectrics. 176, 1–12.

  • Anuruddh Kumar, A. Sharma, Rajeev Kumar, Rahul Vaish.(2016): Performance of K0.5Na0.5NbO3-LiSbO3-CaTiO3 ceramics in acoustic energy harvesting exposed to sound pressure. Ferroelectrics. 504, 149-159.

  • Anmol kothar Vishal S. chauhan, Rajeev Kumar. (2016): Effect of strain hardening on the electromagnetic radiation during plastic deformation of metals and alloys beyond yield point. Nonlinear Dynamics. 85(4), 2687-2704.

  • Anmol Kothari, Vishal S. Chauhan, Amit Kumar, Rajeev Kumar, Rahul Vaish, and Syed Abbas.(2016): Effect of Peierls stress and strain-hardening parameters on EMR emission in metals and alloys during progressive plastic deformation. International Journal of Materials Research. 107(6), 503-517.

  • C. K. Susheel, Rajeev Kumar and V. S. Chauhan. (2016) : Active shape and vibration control of functionally graded thin plate using functionally graded piezoelectric material, Journal of Intelligent Material Systems and Structures. DOI: 10.1177/1045389X16679280.

  • C. K. Susheel, Rajeev Kumar and V. S. Chauhan. (2016): Geometric nonlinear analysis of piezolaminated functionally graded cylindrical shell, International Journal of Structural Engineering. 7(2), 216-238.

  • Anshul Sharma, Rajeev Kumar, Rahul Vaish and Vishal S. Chauhan. (2015): Active vibration control of space antenna reflector over wide temperature range. Composite Structures. 128, 291–304.

  • Anshul Sharma, A. Kumar, Rajeev Kumar, Rahul Vaish and Vishal S. Chauhan.(2015): Finite element analysis on active vibration control using PZT-Pt based functionally graded piezoelectric material. Journal of Intelligent Material Systems and Structure. 27(4), 1-10.

  • Anshul Sharma, Rajeev Kumar, Rahul Vaish and Vishal S. Chauhan and C. R. Bowen. (2015): Performance hierarchy of piezoelectric materials for active vibration control application. Ferroelectrics. 478, 140-156.

  • Tarun Verma, Rajeev Kumar, and Vishal S. Chauhan.(2015): Finite Element Analysis of Varying Width Bistable Piezoelectric Energy Harvester. Energy Technology. 3 (12), 1243–1249.

  • Anuruddh Kumar, A. Sharma, Rajeev Kumar, Rahul Vaish, and Vishal S Chauhan. (2015): Piezoelectric materials selection for sensor applications using finite element and multiple attribute decision making approaches. Journal of Advanced Dielectrics. 5(1), 1-8.

  • Anmol Kothari, A. Kumar, Rajeev Kumar, Rahul Vaish and Vishal S. Chauhan. (2015): A study on epoxy-based 1-3 piezoelectric composites using finite element method. Journal of Polymer Composites. 37(6), 1895-1905.

  • Anshul Sharma, Rajeev Kumar, Rahul Vaish and Vishal Singh Chauhan.(2015): Performance of K0.5 Na0.5 NbO3 (KNN)-based lead-free piezoelectric materials in active vibration control. International Journal of Applied Ceramic Technology. 12(1), 64-72.

  • Anuruddh kumar, A. Sharma, Rajeev Kumar, Rahul Vaish, and Vishal S Chauhan.(2014): Finite element analysis of Vibration Energy Harvesting using Lead-Free Piezoelectric Materials, Journal of Asian Ceramic Societies. 2, 138-143.

  • Anuruddh kumar, Rajeev Kumar, Rahul Vaish, Vishal S. Chauhan.(2014): Performance of lead-free piezoelectric materials in cantilever based energy harvesting devices, International Journal of Computational Materials Science and Engineering. 3(2), 1-18.

  • C.K. Susheel, Rajeev Kumar, Vishal S. Chauhan and Rahul Vaish. (2014): Shape control of spacecraft antenna reflector using lead-free piezoelectric actuators. European Journal of Computational Mechanics. 23(5-6), 199-216.

  • Anshul Sharma, Rajeev Kumar, Vishal Singh Chauhan.(2014): Active Control of Thermally Induced Vibrations in Smart Structure Instrumented with Piezoelectric Materials. Applied Mechanics and Materials. 612, 169-174.

  • Anshul Sharma, Rajeev Kumar, Rahul Vaish and Vishal Singh Chauhan. (2014): Lead-free piezoelectric materials' performance in structural active vibration control. Journal of Intelligent Material Systems and Structures. 25(13), 1596-1604.

  • Anshul Sharma, Rajeev Kumar, Vishal Singh Chauhan. (2013): Fuzzy Logic based active vibration controller, Applied Mechanics and Materials. 367, 357-362.

  • Rajeev Kumar, B.K. Mishra and S.C. Jain. (2008): Static and dynamic analysis of smart cylindrical shell. Finite Elements in Analysis and Design. 45 (1), 13-24.

  • Rajeev Kumar, B.K. Mishra and S.C. Jain. (2008): Vibration control of smart composite laminated spherical shell using neural network. Journal of Intelligent Material System and Structures. 19 (8), 947-957.

  • Rajeev Kumar, B.K. Mishra and S.C. Jain. (2008): Thermally induced vibration control of cylindrical shell using piezoelectric sensor and actuator.  International Journal of Advanced Manufacturing Technology. 38 (5-6), 551-562.

  • Rajeev Kumar, B.K. Mishra and S.C. Jain. (2007): Shape control of laminated antenna reflector using piezoelectric actuator. International Journal of COMADEM. 10 (1), 18-29.

  • Rajeev Kumar, B.K. Mishra and S.C. Jain. (2007): Thermo-electro-mechanical model of general smart shell. International Journal Automation and Control. 1 (2/3), 233-259.

    • Refereed Conference Proceedings

  • Jitendra Adhikari, Rajeev Kumar, Satish Chandra Jain (2022), Finite element analysis of functionally graded graphene induced piezoelectric composites for energy harvesting systems,8th Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS-2022), IIT Guwahati , WestBengal, India

  • Jitendra Adhikari, Rajeev Kumar, Satish Chandra Jain(2020), Electric Power Generation by harvesting energy through Piezoelectric PZT-PZNM Tile, International Conference on Smart Materials and Sustainable Technology (SMST 2020), Goa , India

  • Sharma, S., Kumar, R., & Talha, M. (2020), Nonlinear Vibration Control of a Smart Cantilever Beam with Optimized Poling Direction of Piezoelectric Actuators, International Conference on Smart Materials for Sustainable Technology (SMST-2020), Goa, India.

  • Satish Kumar, Rajeev Kumar and S. C. Jain. Theoretical analysis of vertical contact-mode triboelectric energy harvester. International Conference on Smart Materials for Sustainable Technology (SMST-2020), Goa, India.

  • Tarun Kumar, Rajeev Kumar, S C Jain, Finite Element Modelling of Big Turbo Generator Rotor Vibrations using Newmark-beta Integration Method, (ICEESM 2020), Universitat Politècnica de Catalunya · Barcelona Tech (UPC), Barcelona, Spain.

  • Tarun Kumar, Rajeev Kumar, S C Jain, Big Turbo-generator Shaft Vibrations control using Magnetorheological Fluid Damper, 4th International and 19th National Conference on Machines and Mechanisms (iNaCoMM 2019), IIT Mandi, India.

  • Tarun Kumar, Rajeev Kumar, S C Jain, Fem Simulations for Fatigue Life Estimation of Big Turbo Generator Shaft During Various Fault Disturbances under Active Control. 4th International and 19th National Conference on Machines and Mechanisms (iNaCoMM 2019), IIT Mandi, India.

  • Tarun Pratap Singh, Satish Kumar and Rajeev Kumar. Mathematical Model of Sliding Mode Triboelectric Energy Harvester, 4th International and 19th National Conference on Machines and Mechanisms (iNaCoMM 2019), IIT Mandi, India.

  • Satish Kumar, Rajeev Kumar and Prof. S. C. Jain, Parametric Analysis of Vertical contact Mode Triboelectric Energy Harvester, 4th International and 19th National Conference on Machines and Mechanisms (iNaCoMM 2019), IIT Mandi, India.

  • Prakash Poudel, Rajeev Kumar and S.C. Jain, Power Optimization of a Wind Turbine Using Genetic Algorithm, 4th International and 19th National Conference on Machines and Mechanisms (iNaCoMM-2019), IIT Mandi, India

  • Kamalpreet Singh, Rajeev Kumar and Mohammad Talha, Vibration Control of Smart Cantilever Beam using Fuzzy Logic Controller, 4th International and 19th National Conference on Machines and Mechanisms (iNaCoMM 2019), IIT Mandi India.

  • Jitendra Adhikari, Rajeev Kumar, Satish Chandra Jain , Effect of poling orientation in performance of piezoelectric materials, 4th International and 19th National Conference on Machines and Mechanisms (iNaCoMM 2019), IIT Mandi India.

  • Jitendra Adhikari, Rajeev Kumar, Satish Chandra Jain, Modeling and Simulation of piezoelectric energy harvesting tile, (ICCARE-2019), NIT Durgapur,West Bengal, India.

  • Tarun Kumar, Abhishek Bangunde, Rajeev Kumar, S C Jain, The Torque Simulation of Synchronous Generator Under Loaded Condition for Different Types of Electrical Disturbances, (ICEPE 2018).

  • Sharma, S., Kumar, R., & Talha, M., Shape control of piezolaminated structure using poling tuned piezoelectric actuators, 4th International and 19th National Conference on Machines and Mechanisms (iNaCoMM 2019), IIT Mandi India. 

  • R.M. Pindoriya, B. S. Rajpurohit, R. Kumar and K. N. Srivastava, Comparative Analysis of Permanent Magnet Motors and Switched Reluctance Motors Capabilities for Electric and Hybrid Electric Vehicles, IEEE Engineer Infinite International Conference, (2018), Greater Noida, Delhi, India.

  • R. M. Pindoriya, A. K. Mishra, B. S. Rajpuronit, R. Kumar, An Analysis of Vibration and Acoustic Noise for BLDC Motor Drive, (IEEE PES GM-2018), Portland, USA.

  • R. M. Pindoriya, B. S. Rajpurohit, and R. Kumar, “Design and Performance Analysis of Low-Cost Acoustic Chamber for Electric Machines”, Power India International Conference (PIICON-2018), National Institute of Technology Kurukshetra, Haryana, India.

  • Sharma, S., Kumar, R., & Talha, M., Nonlinear Vibration Control of Functionally Graded Shell using Functionally Graded Piezoelectric Material, International Conference on Recent Advances in Composite Materials (ICRACM-2019), IIT BHU, Varanasi, India.

  • Kumar A, Ghosh R, Kumar, R.., Effect of Interfacial Crack on the Prediction of Bone-Cement Interface ailure of Cemented Acetabular Component. 7 International Congress on Computational Mechanics and Simulation (ICCMS-2019).

  • Kumar A, Ghosh R, Kumar, R.. Effect of Implant Materials on Bone Remodelling Around Cemented Acetabular Cup. 4th International and 19th National Conference on Machines and Mechanisms (iNaCoMM-2019), IIT Mandi, India.

  • Satish Kumar, Rajeev Kumar and S. C. Jain. Triboelectric Tile for Energy Harvesting ”International Conference on Recent Advances in Composite Materials (ICRACM-2019), IIT (BHU) Varanasi (U.P.)

  • Kumar A, Ghosh R, Kumar, R.. Fracture toughness of cortical bone: Experimental and Numerical Investigations. World Congress of Biomechanics (WCB 2018) Dublin, Ireland.

  • Sharma, S., Kumar, R., & Talha, M. Nonlinear Transient Analysis of Piezo Laminated FGM Plate Under Electro-Thermo-Mechanical Loading, International Conference on Technology and Trust (ICTT-2017), GNIOT, NOIDA, India.

  • Satish Kumar, Rajeev Kumar and S. C. Jain. Design and Analysis of Triboelectric Tile for Energy Harvesting from Walking. International Conference On Technology & Trust (ICTT-2017), Greater Noida, India.

  • Kumar A, Ghosh R, Kumar, R.. Determination of Fracture Toughness of Cortical Bone Using Element Free Galerkin Method. International society of technology in arthoplasty conference, (ISTA-2017) Seoul, South Korea.

  • R. M. Pindoriya, A. K. Mishra, B. S. Rajpuronit, R. Kumar, Performance Analysis of Control Strategies of Permanent Magnet Synchronous Motor, (IEEE TENCON-2016), Singapore.

  • R. M. Pindoriya, A. K. Mishra, B. S. Rajpuronit, R. Kumar, Analysis of Position and Speed Control of Sensorless BLDC motor using Zero Crossing Back EMF Technique, (IEEE ICPEICES-2016), Delhi, India,

  • Anshul Kumar Mishra, Bharat Singh Rajpurohit and Rajeev Kumar. Design and Development of Efficient Induction Machine Drive for ReducedTorque Pulsations. IEEE 6th International Conference on Power Systems (ICPS-2016).

  • Rajesh M Pindoriya, Anshul Mishra, Bharat Singh Rajpurohit, Rajeev Kumar. Analysis of Position and Speed Control of Sensorless BLDC Motor Using Zero Crossing Back-EMF Technique. (CPEICES 2016)

  • C. K. Susheel, Anshul Sharma, Rajeev Kumar and V. S. Chauhan. (2014): Optimal Shape Control of Spacecraft Antenna Reflector using Lead-free Piezoelectric Ceramics, 6th World Conference on Structural Control and Monitoring (6WCSMC-2014), UPC Barcelona, Spain.

  • C. K. Susheel, Rajeev Kumar and V. S. Chauhan. Large deformation analysis of piezolaminated structures using four noded shell element, International Conference on Smart Materials, Structures and Systems (ISSS-2014), IISc Bangalore, India.

  • C. K. Susheel, Rajeev Kumar, V. S. Chauhan and Rahul Vaish. Large Deformation Analysis of Piezolaminated Structures using Lead-free Piezoelectric Materials, International Conference on Advances in Manufacturing and Materials Engineering, (AMME - 2014), NIT Surathkal, India.

  • Anshul Sharma, C. K. Susheel, Rajeev Kumar and V. S. Chauhan. Active Control of Thermally Induced Vibrations of Antenna Reflector. 6th World Conference on Structural Control and Monitoring (6WCSMC-2014), UPC Barcelona, Spain.

  • Anshul Sharma, Rajeev Kumar, Rahul Vaish and V. S. Chauhan. Active vibration control of smart structure integrated with lead-free piezoelectric materials, International Conference on Smart Materials, Structures and Systems (ISSS-2014), IISc Bangalore, India.

  • Anshul Sharma, C. K. Susheel, Rajeev Kumar and V. S. Chauhan. Active Control of Thermally Induced Vibrations in Smart Structure Instrumented with Piezoelectric Materials, International Conference on Design, Manufacturing and Mechatronics (ICDMM - 2014), TCER Pune, India.

  • Kothari A, Kumar A., Kumar, R..” Design optimization of piezoelectric energy harvester using finite element analysis.” International Conference on Theoretical, Applied, Computational and Experimental Mechanics, 2014.

  • Anshul Sharma, C. K. Susheel, Rajeev Kumar and V. S. Chauhan. Fuzzy Logic Based Active Vibration Controller, International Conference on Mechanics, Simulation and Control (ICMSC 2013), Kanyakumari, India.

  • Anshul Sharma, Rajeev Kumar, Vishal Singh Chauhan. Active Control of Vibration of Piezoelectric Flexible Smart Structure using Fuzzy Controller, International Conference on Computational Mechanics (CM13 – 2013), Durham, UK.

  • Rajeev Kumar, B.K. Mishra and S.C. Jain. (2007): Vibration control of smart composite laminated paraboloid shell using neural network. Proceedings of IMECE2007, 2007 ASME International Mechanical Engineering Congress and Exposition November 11-15, 2007, Seattle, Washington, USA. Paper No. IMECE2007-41416.

  • Rajeev Kumar, B.K. Mishra and S.C. Jain. (2007): Modeling trends in smart structure with piezoelectric sensor and actuator. National Conference on Design, Dynamics and Manufacturing. Department of mechanicals engineering Sant Longowal Institute of Engg. & Tech. 16-17 March, 2007, pp 315-324.
  • Hipparkar Dattatraya Rama, Rajeev Kumar, B.K. Mishra and S.C.Jain (2006). Active vibration control of plate with integrated sensors and actuators. National conference on Smart Structures systems for Aerospace Applications-2006. 23rd and 24th November 2006 Research Center Imarat, Hyderabad.

  • Santosh Udagiri, Rajeev Kumar, Ashish Srivastava and S.C.Jain (2006). Active vibration control of smart curved beam. National conference on Smart Structures systems for Aerospace Applications-2006. 23rd and 24th November 2006 Research Center Imarat, Hyderabad.

  • Rajeev Kumar, B.K. Mishra and S.C. Jain (2006). Thermally induced vibration control of cylindrical shell using piezoelectric sensors and actuators. First International & 22nd All India Manufacturing Technology Design and Research Conference (22nd AIMTDR) 21st -23rd December 2006, IIT Roorkee. Paper No. CAD -132.

  • Santosh Udagiri, Rajeev Kumar, Ashish Srivastava and S.C.Jain (2006). Finite element modeling of smart curved beam. All India seminar on advances in product development-2006. February 17-18, 2006, MNNIT Allahabad.

  • Rajeev Kumar, B.K. Mishra and S.C. Jain. (2005). Piezoelectric Induced deflection of laminated composite shells using Finite Element Method. The Structural engineering convention. December 14-16, 2005 IISc Bangalore.

  • Anant Patil, Rajeev Kumar and S.C. Jain (2005). Optimal active vibration control of smart plate. ISSS International Conference on Smart Materials, structures and systems. July 28-30, 2005 IISc Bangalore

  • Rajeev Kumar, B.K. Mishra and S.C. Jain. (2005). Thermally induced shape distortion control of antenna reflector with piezoelectric patches. ISSS International Conference on Smart Materials, structures and systems. July 28-30, 2005 IISc Bangalore.

  • Rajeev Kumar, B.K. Mishra and S.C. Jain. (2005). Thermally induced vibration suppression of antenna reflector with piezoelectric sensors and actuators. ISSS International Conference on Smart Materials, structures and systems. July 28-30, 2005 IISc, Bangalore.

  • Rajeev Kumar, B.K. Mishra and S.C. Jain. (2004). Active vibration control of smart paraboloidal shell. International conference on theoretical, applied, computational and experimental mechanics. December 28-30, 2004, IIT Kharagpur Paper: ID-108.

  • Rajeev Kumar, B.K. Mishra and S.C. Jain. (2003). Smart Material and Structure- A Review. XIII National Conference of Indian Society of Mechanical Engineers December 30-31, 2003, IIT Roorkee Paper No.: MD-068.

  • Rajeev Kumar, Ashish Srivastav, B.K. Mishra, S.C. Jain. (2003). Finite Element formulation and Active Vibration Control using real coded Genetic algorithm. International Conference on Mechanical Engineering 2003. 26-28 December 2003. Dhaka, Bangladesh. Paper No. ICME2003-ABS-03/106.

  • Rajeev Kumar and Onkar Singh (2003). Comparative Evaluation of Different Configurations of Heat Recovery Steam Generators (HRSG). Fourth National Conference on Thermal Systems. February 22-23, 2003. Institute of Technology Banaras Hindu University Varanasi.

  • Rajeev Kumar and Onkar Singh (2003). Computer Simulation and Optimization of Heat Recovery Steam Generator (HRSG). Proceedings of ASME Turbo Expo 2003 Power for Land, Sea, and Air. June 16-19, 2003. Atlanta Georgia, USA. Paper No. GT2003-38095.

  • Rajeev Kumar, B.K. Mishra and S.C. Jain. (2005). Thermally induced shape distortion control of antenna reflector with piezoelectric patches. ISSS International Conference on Smart Materials, structures and systems. July 28-30, 2005 IISc Bangalore.

  • Rajeev Kumar, B.K. Mishra and S.C. Jain. (2005). Thermally induced vibration suppression of antenna reflector with piezoelectric sensors and actuators. ISSS International Conference on Smart Materials, structures and systems. July 28-30, 2005 IISc, Bangalore.

  • Rajeev Kumar, B.K. Mishra and S.C. Jain. (2004). Active vibration control of smart paraboloidal shell. International conference on theoretical, applied, computational and experimental mechanics. December 28-30, 2004, IIT Kharagpur Paper: ID-108.

  • Rajeev Kumar, B.K. Mishra and S.C. Jain. (2003). Smart Material and Structure- A Review. XIII National Conference of Indian Society of Mechanical Engineers December 30-31, 2003, IIT Roorkee Paper No.: MD-068.

  • Rajeev Kumar, Ashish Srivastav, B.K. Mishra, S.C. Jain. (2003). Finite Element formulation and Active Vibration Control using real coded Genetic algorithm. International Conference on Mechanical Engineering 2003. 26-28 December 2003. Dhaka, Bangladesh. Paper No. ICME2003-ABS-03/106.

  • Rajeev Kumar and Onkar Singh (2003). Comparative Evaluation of Different Configurations of Heat Recovery Steam Generators (HRSG). Fourth National Conference on Thermal Systems. February 22-23, 2003. Institute of Technology Banaras Hindu University Varanasi.

  • Rajeev Kumar and Onkar Singh (2003). Computer Simulation and Optimization of Heat Recovery Steam Generator (HRSG). Proceedings of ASME Turbo Expo 2003 Power for Land, Sea, and Air. June 16-19, 2003. Atlanta Georgia, USA. Paper No. GT2003-38095.

.